Home Battery Backup
- Release Time:2022-11-04 04:11:30
- Pageviews:5,425
Demand
Solution
About the system
LYBESS wall-mounted home battery backup adopts wall-mounted installation method, which can support multiple battery packs in series and inverters to form energy storage systems with different capacity requirements, can be used with photovoltaic modules, and is compatible with 99% of first-line brand inverters . It adopts the world’s first-class brand of lithium iron phosphate batteries, intelligent EMS and other high-quality accessories, and can also install a heating system to cope with the cold winter, so that the energy storage system is stable and safe. The service life is about 20 years, and the hardware failure rate is less than 1‰. The product warranty is 8-10 years.
Product Parameter | |||
PACK Energy | 2.6kWh | 5.2kWh | 10.4kWh |
Parallel connections supported number | PACK of the same capacity, support 2-8 packs in parallel (per inverter) | ||
Battery Type | LFP(LiFePO4) | ||
Nominal Voltage | 51.2V | ||
Cycle Life | ≥6000 25℃ 0.5C | ||
Communication | CAN、RS485 | ||
Temperature Range(No heating system included) |
Charge: 0℃~45℃ Discharge: -10℃~55℃ |
||
Humidity | 15%-85% | ||
IP Protection | IP65 | ||
Compliance Standards |
CE (Pack) UN38.3 (Pack) IEC62619(Cells) UL1973 (Cells) |
With the continuous development of inverter technology, the main direction of inverter technology has gradually transitioned from 3-5KW low-voltage inverter to 8-12KW high-voltage inverter. The LYBESS Ground-HV home battery backup system adopts floor-standing design and supports 4-8 units connected in series to form a high-voltage energy storage system with a voltage range of 192V-384V. In addition to the wall-mounted hardware quality, the energy conversion efficiency of the battery is higher than that of the traditional parallel energy storage system, the cost of the supporting inverter components is lower, and the total power of a single system is larger. Therefore, it is suitable for home users with large power requirements.
Product Parameter | ||||||
Battery Energy | 2.496kWh | 9.984KWh | 12.48kWh | 14.976KWh | 17.472kWh | 19.968KWh |
Series connections supported number | PACK of the same capacity, support 2-8 packs in series (per inverter) | |||||
Battery Type | LFP(LiFePO4) | |||||
Nominal Voltage | 48V | 192V | 240V | 288V | 336V | 384V |
Cycle Life | ≥6000 25℃ 0.5C | |||||
Communication | CAN、RS485 | |||||
Temperature Range(No heating system included) |
Charge: 0℃~45℃ Discharge: -10℃~55℃ |
|||||
Humidity | 15%-85% | |||||
IP Protection | IP65 | |||||
Compliance Standards |
CE (Pack) UN38.3 (Pack) IEC62619(Cells) UL1973 (Cells) |